Search Marineland

Looking for Answers about Marineland Valve Block for C-360?

Shop now at Marineland
or
Choose a Category
Most Recent Questions
Recent Question:
Intake Tube for C-360
Recent Question:
Leaking/Dripping under Motor Head
Recent Question:
C160 leaking by all latches suddenly...What do I need to replace to stop the leaks?
Recent Question:
What is the best or efficient way to clean tubes?
Questions with Most Recent Answers
Question:
Intake Tube for C-360
Question:
Leaking/Dripping under Motor Head
Question:
What is the best or efficient way to clean tubes?
Question:
C160 leaking by all latches suddenly...What do I need to replace to stop the leaks?

Customer Questions & Answers for
Marineland Valve Block for C-360

Valve Block for C-360.
Customer Questions & Answers:
19 Questions
 | 
19 Answers
Overall Rating:
3.909 out of 5
3.9
out of
5

Questions & Answers for Marineland Valve Block for C-360

Question

When do you expect to have the valve block assembly in stock for the C-360?

I'm in need of the valve block for my 360. I've had a lot of experience with your canister filters over the years & I'm getting a very slight drip from around the block. I replaced the gaskets & checked seals. This should solve the problem. By the way I've always used Marineland filters & find them excellent in my various tanks. Great products. Thanks!
Aquarium Type: Freshwater
Aquarium Size: Mid-Size (20-60g)
asked 2 years, 3 months ago
Customer Avatar
by
LeadHusky
Littleton, CO
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
They should be available within a couple of weeks.

BREX
answered 2 years, 2 months ago
Customer Avatar
by
BREX
0points
1out of 2found this answer helpful.
Question

Marineland C-360 interchangable parts?

Need a Marineland C-360 Valve Block.
Would a different model be interchangable?
Such as the Valve Block for C-530?
Aquarium Type: Saltwater
Aquarium Size: Large (60g+)
 
Products related to my question
 
asked 2 years, 2 months ago
Customer Avatar
by
Nancy1861
Dublin, TX 76446, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
No, the 160 and 220 use the same, the 360 and 530 have their own, and cannot be swapped.

BREX
answered 2 years, 2 months ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

c-360

the valve block has gone bad........when will it be in stock as nobody has these in stock any where and i need my filter system working!!!!!!!!!!!!!!!!
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 2 years, 1 month ago
Customer Avatar
by
Snow
Arkansas, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
We are sorry to hear this. We expect them in later this month, so they should be back in stock by the last week of May, once they go through quality check, etc.

BREX
answered 2 years, 1 month ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

Out of Stock - email?

Could you email me when this comes in stock?
Aquarium Type: Saltwater
Aquarium Size: Large (60g+)
asked 2 years, 1 month ago
Customer Avatar
by
Nancy1861
Dublin, TX 76446, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
This is due in the week of June 5 if we cannot get it here sooner. It would be available by the following week. We do not have a system where we can be notified to email customers, unfortunately.

BREX
answered 2 years, 1 month ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

Any idea on how long the valve block for the C360 will be on backorder?

Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 2 years, 1 month ago
Customer Avatar
by
debbieviau1
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
It may come in sooner, but right now it is scheduled for mid-June.

BREX
answered 2 years, 1 month ago
Customer Avatar
by
BREX
-2points
0out of 2found this answer helpful.
Question

is Valve Block for C-360 in stock yet

Valve Block for C-360, is it in stock yet?
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 2 years ago
Customer Avatar
by
zakk
Lafayette, LA, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
Yes, it is in stock, and shows it to be so, on our site.

BREX
answered 2 years ago
Customer Avatar
by
BREX
-1point
0out of 1found this answer helpful.
Question

Hose size

What are the I.D. and O.D. sizes for the C-220 and the C-360
Aquarium Type: Saltwater
Aquarium Size: Mid-Size (20-60g)
asked 1 year, 7 months ago
Customer Avatar
by
oldman
Dayton, OH, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
The i.d. for the 220 is 5/8 and the i.d. for the 360 is 3/4". We do not have o.d. for them, as that is not necessary to match up the tubing to what is sold in Lowes/Home Depot and aquarium stores.

BREX
answered 1 year, 7 months ago
Customer Avatar
by
BREX
+1point
1out of 1found this answer helpful.
Question

When will this part be back in stock?

Do the O-rings below fit the valve block for the C-360?
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
 
Products related to my question
 
asked 1 year, 4 months ago
Customer Avatar
by
Mervin
Charleston, SC, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
No, the o rings do not fit the C360 at all, they are for the valves on the Magnum 350. The valve block will be back in stock sometime in March.

B-Rex
answered 1 year, 4 months ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

Will this item be back in stock?

I am needing to replace just the hexagonal shaped "nuts" that attach the tubing. Is there a way to purchase just those. They have broken.
Aquarium Type: Freshwater
Aquarium Size: Mid-Size (20-60g)
asked 1 year, 3 months ago
Customer Avatar
by
Turbotank
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
No, you need to purchase the valve block, the nuts are not available separately.

B-Rex
answered 1 year, 3 months ago
Customer Avatar
by
BREX
-1point
0out of 1found this answer helpful.
Question

I cleaned the filter “canister” for the very first time and when I put it back together there are micro bubbles coming in the tank.

I cleaned the filter “canister” for the very first time and when I put it back together there are micro bubbles coming in the tank. I poured some water over the valve and it stopped for a minute until the water was suck up and now it’s sucking up a little bit of air. What happened? If I need a new valve, when it will be available? I bought the canister less than 6 months ago!!
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 1 year, 1 month ago
Customer Avatar
by
Giordano
Puerto Rico
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
Be sure your o ring did not get pinched or damaged when you removed and replaced the motorhead. Also, the same goes for the o rings on the underside of the valve block. There are two each on each nozzle. Also, as you look down on top of the valve block, you should not see any threads on the tubing nozzles. If you can, you do not have your tubing pushed down far enough onto the valve block.

If you do have a bad valve block or o ring, please call or email us as they would still be under warranty.

BREX
answered 1 year, 1 month ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

Can I buy just the four o rings that go on the valve block?

Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 11 months ago
Customer Avatar
by
Filterisleaking
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
No, they come in the gasket kit with the tray gaskets and large o ring for the motorhead.

BREX
answered 11 months ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

o rings for valve block

I bought the o ring kit. There are 2 small o rings but 4 on the valve block. I tried replacing just the two closer to the end but now the valve block will not go back onto the filter head.
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 11 months ago
Customer Avatar
by
Filterisleaking
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
As long as you put the new o rings on the correct spot of the nozzle, I know no reason why it would not fit. This will sound crazy, but make sure you have the valve block fully in the open position and are putting it on correctly.

Please call us directly if you continue to have issues.

BREX
answered 11 months ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

Are motor head assemblies available for purchase?

need a new Motor head for my daughters c-360, is this available for purchase? Or covered under warranty? She has two c-360s, motor head leaks at valve block, but other unit does not leak when same valve block is used.
Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
 
Products related to my question
 
asked 3 months, 2 weeks ago
Customer Avatar
by
Rachel13237
Buffalo, NY, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
No, motorheads are not sold separately. Have you replaced the motorhead o ring? That is the most common reason for a leak.

The unit has a 3 year warranty. You would need to ship just the motorhead back, if that is the issue, to us and we would replace it for you.

BREX
answered 3 months, 1 week ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

When will the C-360 VALVE BLOCK be available. or can you give me a o-ring parts list for this part

Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 2 months, 2 weeks ago
Customer Avatar
by
JOHN1978
Niagara Falls, ON, Canada
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
It is due to arrive sometime this week. We do not have an o ring parts list for the valve block. The only o rings that can be replaced on it are the ones on the nozzles underneath. Spares of those are placed in each C360 package for future use.

BREX
answered 2 months, 2 weeks ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

When will you get more? I need one soon! Series 360 block value.

Aquarium Type: Saltwater
Aquarium Size: Mid-Size (20-60g)
asked 6 months ago
Customer Avatar
by
Leann
Tumwater, WA, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
Sometime later in January.

BREX
answered 6 months ago
Customer Avatar
by
BREX
+1point
1out of 1found this answer helpful.
Question

Valve head C-360 When will they be in stock?

I see the C-360 valve head is out of stock AGAIN. When do you expect more in. Can I pre-order?
Aquarium Type: Freshwater
Aquarium Size: Small (20g or less)
asked 1 month, 3 weeks ago
Customer Avatar
by
AJames
California, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
These are on order and we expect them to be in within a couple of weeks.

BREX
answered 1 month, 3 weeks ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

When will you have the Valve block for the C 360 canister filter? I desperately need the replacement ASAP!

Aquarium Type: Freshwater
Aquarium Size: Large (60g+)
asked 5 months, 3 weeks ago
Customer Avatar
by
Troyden
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
I show we are expecting a shipment of parts for that filter later this week or sometime next week. Give us a call, we may be able to help you somehow.

BREX
answered 5 months, 3 weeks ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

when will you have valve block in stock for C360?

asked 5 months, 1 week ago
Customer Avatar
by
ModyDickRick
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
They will be in stock by next week, if not sooner.

BREX
answered 5 months, 1 week ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
Question

outstock

When do you espected to be back on stock??
Aquarium Type: Both
Aquarium Size: Large (60g+)
asked 2 weeks ago
Customer Avatar
by
oscie
Los Angeles, CA, USA
on Valve Block for C-360
0points
0out of 0found this question helpful.
Answer this Question
1 answer
Answers
answer 1
We receive shipments pretty regularly, so I anticipate it being back in stock within the next week or two.

BREX
answered 2 weeks ago
Customer Avatar
by
BREX
0points
0out of 0found this answer helpful.
1 of 1